DNA Oligos - single tube

Oligos are made using a DNA synthesizer, which is basically a computer-controlled reagent delivery system. The first base is attached to a solid support, usually a glass or polystyrene bead, which is designed to anchor the growing DNA chain in the reaction column. DNA synthesis consists of a series of chemical reactions.

Each cycle of reactions results in the addition of a single DNA base. A chain of DNA bases can be built by repeating the synthesis cycles until the desired length is achieved.

Scale of synthesis refers to the amount of starting CPG (controlled-pore glass) support-bound monomer used to initiate the DNA synthesis, not the amount of final material synthesized. This is the same for all manufacturers of synthetic DNA using standard phosphoramidite chemistry. When a 40 nmole scale synthesis is specified, approximately 40 nmoles of the first base is added to the DNA synthesizer. For an average 25-mer, at least 25% of this starting material will result in failure sequences. Hence it is not possible to produce 40 nmoles of full-length product from a 40 nmole scale synthesis. The losses occur during synthesis, post-synthetic processing, transfer of material, and quality control.

For oligos of standard length (≤ 33 nucleotides) we guarantee a certain yield of DNA (OD₂₆₀ applying to a 20-mer) to be delivered according to the respective scale of synthesis and mode of purification.

Coupling efficiency is a way of measuring how efficiently the DNA synthesizer is adding new bases to the growing DNA chain. If every available base on the DNA chain reacted successfully with the new base, the coupling efficiency would be 100%. Few chemical reactions are 100% efficient. The industry standard for coupling efficiency during DNA synthesis is around 98,5%, with maximum coupling efficiency obtainable being around 99%. This means that at every coupling step approximately at least 1% of the available bases fail to react with the new base being added. Coupling efficiency is significantly influenced by the quality of raw material (amidites and solutions), instruments and synthesis protocols used.

Please note that Metabion regularly overperforms the industry standards written above, reaching a coupling efficiency of up to 99,7%, even for long unmodified oligonucleotides.

Moreover, Metabion's QC (Quality Control) system ensures that every new batch of chemicals passes strict quality controls. Our machines are serviced by a well organised maintenance program and synthesis cycles are perfectly adjusted to the type of ordered oligo.

Coupling efficiency is important because the effects are cumulative during DNA synthesis. The Table below shows the effect of a 1% difference in coupling efficiency and how this influences the amount of full-length product, following the synthesis of oligos of different length. Considering a relatively short oligo of 20 bases, a 1% difference in coupling efficiency can result in a 15% difference, in terms of full-length final product.

The table also shows that the longer an oligo, the lower the yield of full length product that can be expected, due to limitations set by chemistry. Assuming a coupling efficiency of 99% for every single base addition (industry standard is 98.5 % in average), the raw product of a 95-mer synthesis would consist of only 38.5 % full length oligonucleotide. Separating full length and failure sequences from each other by HPLC purification results in additional loss, so that low yields are a normal matter of fact.

Note that metabion regularly exceeds 99 % of coupling efficiency, reaching a coupling efficiency of up to 99,7%, even for long unmodified oligonucleotides.

Every DNA base (in terms of DNA synthesis chemistry, we are speaking of phosphoramidite monomers and amidites) added during DNA synthesis has a dimethoxy-trityl (trityl) protecting group attached to the 5´-hydroxyl position. This acid labile trityl-group is bound to the 5’-end of each support-bound monomer and protects the corresponding base from undergoing unwanted chemical reactions during the synthesis cycle. The trityl-group is removed in the first step of each synthesis cycle, immediately before a new base is added, until the elongation of the nucleotide chain is complete. The final trityl-group is removed before delivery (Unless otherwise requested).

The trityl-group is colorless when attached to a DNA base but it gives a characteristic orange color once removed. The intensity of this color can be measured by UV spectrophotometry and it is directly related to the number of trityl molecules present. Following the first coupling step, the amount of trityl released during deblocking is directly proportional to the amount of full-length oligo synthesized in the previous cycle. When the trityl is cleaved during the deblocking step, the resulting trityl cation is orange in color. The intensity of this color can be measure by UV spectrophotometry. By comparing the intensities of the trityl cation produced after the first and last coupling steps, one can calculate the average successful base coupling per cycle and hence the coupling efficiency.

DNA synthesis is a complicated process, which has improved significantly over the last years. Despite these improvements, all manufacturers have an inherent failure rate. We are constantly developing our processes and systems to minimize these losses; however, it is inevitable that we will occasionally have to re-synthesize some oligos. Please note that metabion performs strict quality controls on each and every oligo synthesized. If an oligo does not pass our quality tests, it will be resynthesized.

Unmodified standard oligos (≤33 bases) ordered before 6 pm German time will be shipped the next working day. HPLC purified, longer and modified oligos need an additional working day to be ready for shipping. Shipping time within Europe does normally not exceed 1 day. For countries outside of Europe, please inquire.

If it happens that an oligo does not pass our in-house quality control, it needs to be resynthesized. In those cases we have to apologize a 1-2 days increase of shipping time.

This depends on the complexity (length, base composition, modifications) of your requested molecule, as well as on the application desired. Failure sequences may be generated both during and post-synthesis. Due to the nature of synthesis chemistry (coupling efficiency < 100%) and/or post-synthetic modification procedures, there will remain failure sequences (n-x), free modifiers and non-labeled product in the "crude" unpurified product.

We strongly recommend that all modified oligos and oligos longer than 80 nucleotides are subjected to HPLC purification, no matter which kind of downstream application is envisaged.

For "critical" applications like gene synthesis, subcloning, mutagenesis and alike, HPLC purification should be considered for oligos > 45 nucleotides.

HPLC purification is standard (no additional charge) for all our dual-labeled probes and/or multi-labeled oligos, as well as for all our RNA and large scale oligos.

Many of the modified amidites are less stable and do not couple as efficiently as the unmodified bases (even though longer coupling procedures may be used). Therefore, failure sequences are more abundant than in normal synthesis. Consequently, most of the modified oligos should be purified by HPLC to remove the more abundant failure sequences. Final yields are reduced as a result of the purification step, which results in a much purer final product, nearly 100% modified.

First of all, we strongly recommend our customers to sequence more than one clone and compare the sequencing results. In most cases, sequencing at least 3 clones is sufficient to find the clone with the desired sequence. This is also due to circumstances out of oligo manufacturers´ control, like sequence errors generated by enzymes like Taq polymerase used in downstream experiments. PCR-cloned sequences may contain errors due to the inherent "infidelity" of any kind of available Polymerases. Taq may have error rates as high as 0.25%. If Taq was not used, the difference could be due to a recombinant vector or the host cell system "self-correcting" errors.

The problem can also be due to the primers. Base insertions are attributed to a small amount of detritylated amidite present during coupling, while deletions are probably due to failure sequences that did not get capped and were subsequently extended.
However, a better explanation for the observation of altered sequences is the incomplete deprotection of the oligo. If an oligo still bears a protecting group in one or more positions, this will be transferred to the subsequent PCR product, which is then transformed into E.coli. Here, the host mismatch repair system will likely attempt to correct the corresponding anomaly with a base, which might be the wrong one. The most likely culprit for incomplete deprotection is the isobutyryl protected dGs. These are the most difficult protection groups to remove.

In general, the longer the oligo, the greater the probability of side reactions during oligo synthesis, along with higher chances to incur into incomplete deprotection. Potential sources of side reactions causing failure products are depurination (which mainly affects the base A) and formation of secondary structures due to the oligos’ sequence. There is no way to completely exclude these effects! However, metabion tries to minimise these failures by continuously optimising synthesis as well as purification protocols!

Unless requested, oligos are synthesized without either 3´or 5´ phosphate. The 5´ and/or 3’-phosphate is available as a modification at additional charge.

Ligation reactions require a 5´phosphate. If your oligos do not contain a 5´ phosphate, ligation will not occur or only with a very low efficiency. The problem can be addressed without ordering an additional oligo pair: phosphorylate your oligos enzymatically with kinase before use in ligation reactions.

For the 0.2 µmol synthesis scale, monomer coupling is done at a 40-50-fold excess. Doing so for larger scale synthesis (such as for a 1.0 µmol scale) would be cost-prohibitive. Large-scale syntheses are done only at 10-fold mole excess of amidites. To increase the final yields of these large-scale synthesis, the coupling times are extended, so to increase coupling efficiencies.

The real answer lies in the resolution limit of the purification method and on the coupling efficiency of the DNA synthesizer. We can synthesize DNA oligos of 220 bases and obtain sufficient quantities by HPLC purification to perform successful gene construction. However, it should be remembered that the longer the oligo, the greater the chance of accumulated sequence errors.

Coupling efficiency is the factor that mainly affects the length of DNA that can be synthesized. Base composition and synthesis scales will also be contributing factors. For more information regarding coupling efficiency, please refer to the FAQ: What is coupling efficiency?

Importantly, the probability of premature synthesis interruption increases dramatically for longer oligos, due to poor nucleotide-coupling efficiency. Moreover, the synthesis of special “long oligos” requires more raw material, such as amidites and solutions that need to be used in higher excess.

However, as we are very experienced in producing very long oligos, do not hesitate to discuss your projects with our specialists.

There is a normal degree of variation in the appearance of the supplied dry oligonucleotide pellets. Variation in appearance per se does not indicate a quality defect. In general, appearance of unmodified and dye-labeled oligo pellets may vary from powdery to hyaloid. The color of unmodified oligo pellets may range from transparent over off-white and yellowish to tan. The pellets of labeled oligos are colored according to the dye attached.

Purified water, TE or any biological buffers (i.e. with physiological pH) are acceptable as diluents. The recommended diluent volume is 100 µl - 1 ml, the concentration depending on the application to be used and the yield of the resulting product. Standard concentration for PCR primers is 0.1 mM.

To gain a maximum shelf life for oligonucleotides, samples should generally be stored dehydrated at ≤ -15°C in absence of light. Under the mentioned conditions, samples are stable for at least 6 months. In case of a longer storage period, oligos should be pretested for molecular integrity prior to experimental use. If sterile diluent is used to resuspend the oligo, this will be stable at 20°C for several days to weeks, at 4°C for about a month. If stored frozen at –20°C or –70°C, it will remain stable for several months. Repeated freeze-thaw should be avoided, as this will denature the oligo. Moreover, the oligo stability in solution depends on the pH. Dissolving oligos into acidic solutions may result in oligo degradation. Therefore, avoid the use of distilled water, since solution pH may be as low as 4-5.

In addition to what above advised, we recommend that you minimize the exposure of modified oligonucleotides– especially those fluorescently labelled - to light, to avoid any bleaching effect.
Moreover, we recommend storing dye-labelled oligos highly concentrated and not in working dilutions, if you are not planning to use them within 24 hours. The higher the dilution factor, the faster the fluorescent activity fades away. Therefore, try to store highly concentrated aliquots frozen, thaw them only once, dilute them just before use and store the aliquots at 4°C in the dark.

Yes, they are as follows:

Metabion is dedicated to reliably deliver high quality products. While every production step is performed in light of achieving best quality, the product is released only if it passes our final inspection. Mass Spectrometry has become the state-of-the-art technology for verifying the integrity of oligonucleotides, and metabion has been the first custom oligo house who introduced routine mass checks into its operations. Each and every oligo is characterized by either MALDI- or ESI-ToF and stringent release criteria are applied.

Mass Spectrometry allows for the most sensitive detection of low-level by-products/impurities such as

• n-1/n-x oligos
• Depurination
• Incomplete Deprotection
• Acrylonitrile adducts
• High Salt Content Identification

Moreover, it is the fastest and most efficient way to identify potential product mix-ups.

We run two different types of Mass Spectrometry (MS) instruments in order to cope best with quality and quantity/throughput issues determined by the specifications of the respective oligo/analyte. While each instrument type precisely characterizes oligonucleotides in terms of composition through direct molecular weight measurement, their field of application is diligently adjusted to suitability considerations.

MALDI-ToF instruments typically have a higher throughput, while the limits of using this technique become manifest, if it comes to analyzing long oligonucleotides, or oligos carrying certain photo-labile modifications (e.g.common quenchers like BHQ®s, Dabcyl used in DLPs).

ESI-ToF is less efficient in terms of throughput but perfectly compensates for resolution issues with long oligos as well as for a potential detrimental laser impact on labile/photosensitive modifications – thus being a "natural" complement to MALDI-ToF analysis.

Synthetic oligonucleotide purification is particularly challenging because of the small differences in size, charge and hydrophobicity between the full-length product and impurities, which often co-elute.

For improved analysis of complex samples like long and/or multiple labeled oligos, metabion offers liquid chromatography (LC) coupled with electrospray ionization mass spectrometry (ESI-MS). The mass spectrometer is connected to a high pressure liquid chromatography (HPLC) system, which allows premium analyte characterization via chromatographical separation, followed by respective molecular weight determination. With this system, the mass of oligonucleotides between 2 and 220 bases can be analysed with high accuracy, resolution and sensitivity. Our expert production team will take care of the method (MALDI or ESI ToF) that best applies to your sample.

OPC® is an abbreviation for “oligonucleotide purification cartridge”. This purification method consists of a reverse-phase (RP) chromatography, which separates complete, newly synthesized oligonucleotides from failure sequences, by-products, and other impurities. Specifically, the OPC® cartridge binds the dimithyltrityl (DMT) of the trityl-on oligonucleotide (complete, newly synthesized) from non-DMT bearing molecules. This techniques performs best for oligonucleotides up to 40 nucleotides in length.

Our high pressure liquid chromatography (HPLC) purification system also consists in a RP- chromatography. However, this is performed under high-pressure and highly efficient conditions.

Both in OPC® and HPLC, application of mild acids effectively removes the DMT group, thus allowing elution of purified and detritylated oligonucleotides.

Preparative High Pressure Liquid Chromatography (HPLC) deals with isolating the separated components of a sample, and can be done on small-, mid- and large scale operations. In other words, the objective of a preparative HPLC is isolating and purifying a product. Practically, the sample goes from the detector into a fraction collector or it is collected manually.

Analytical HPLC refers to the processes of separating and identifying the components of a sample. It is usually a small-scale process, whose objective is the qualitative and quantitative determination of a compound. The sample goes from the detector into waste.

metabion offers analytical HPLC as an additional (optional) quality control method, complementing our Mass-Check QC, which is performed by default on all our oligos.

For product/quality documentation please see FAQ: What kind of documentation do I get with my RNA oligos?

There are two ways of ordering:

1. The preferred way is order transmission through our Web Order Portal for most convenient online shopping.
2. You can order by sending us an e-mail with our pre-formatted excel order file as attachment.
   
   

   DNA Oligo Order	WOP	download xlsx »
   DNA Dual Labeled Probes	WOP	download xlsx »
   Light Cycler Probes (LCP)	WOP	download xlsx »
   NGS Primer	WOP	download xlsx »
   ZNA®	WOP	download xlsx »
   DNA Oligos - MTP plate format	WOP	download xlsx »
   dsDNA/duplex DNA	WOP	download xlsx »

   
   When you write your email, please make sure to address the following questions in the excel template:
   • Name of the oligo?
   • Sequence of the oligo in 5’-3’ orientation?
   • Yield range
   • Purification required?
   • Delivery form? (dry / in water/ buffer + concentration)
   • Modifications?
   
   If you are a new customer, please additionally provide us with
   • Your shipping and billing address
   • Any other information like Purchase Order number, VAT number (VAT only for customers resident in the EU) etc

In case you opt to transmit orders via email using your own format(s), we need to alert you that above mentioned information is obligatory for processing your order. Due to extra efforts necessary for individual order format transfer into our system, order processing will take longer as compared to preferred web orders and pre-formatted emails.

If you want to connect your eProcurement System with our Web Order Portal (e.g. OCI - Open Catalog Interface), please simply contact our Customer Service (customerservice@metabion.com).

Confirmation

Online orders or email orders which indicate an email address will be confirmed by email.

Delivery

Average in-house turnover times (freight forwarders delivery time not included):

• unmodified Standard oligos (< 34 bases): 1 working day
• unmodified oligos including OPC/HPLC purification: 2-3 working days
• single labelled oligos with/without HPLC purification: 2-4 working days

Above mentioned estimated turnover times are only indications and refer to our standard portfolio. In terms of "counting" working days, orders placed past 15:00 (Munich time) are considered to be next day's order. Major deviations will be communicated timely. Be assured that we try to process your order as quick as possible without compromising on quality!

All our products are offered according to our terms and conditions.

The label on the oligo tube shows basic information like oligo name, name of person who ordered, oligo sequence including modifications, oligo ID, amount of DNA (OD₂₆₀ and nmol), Tm, and molecular weight.
In addition, you will receive a synthesis report containing more detailed information on the physical-chemical properties of the oligo, such as base composition, base count, purification grade, amount of DNA (OD₂₆₀ and nmol), Tm and molecular weight. If you have ordered HPLC purification or your ordered oligo is HPLC purified by default (e.g. Dual labeled oligos, dual modified oligos, mid- and large scale oligos), you will also get a printout of the preparative chromatogram.

While each and every oligo produced and delivered is characterized by either MALDI- or ESI-ToF before release, Mass-Check documentation/traces will only be provided if requested at time of order placement. Additional charges may apply. The following terminology is used for differentiating between offered QC options including respective documentation coverage in our order forms and on supporting documents delivered with the products:

Mass Check
Standard quality control performed on each and every oligo. Either MALDI- or ESI-ToF, subject to the "nature of the oligo", and metabion internal procedures. This service is free of charge and no printed/pdf documentation is provided.

MALDI-ToF
Explicitly ordered and performed MALDI-ToF check. Product delivered with MALDI-ToF traces. Additional charges apply.

ESI-ToF
Explicitly ordered and performed ESI-ToF check. Product delivered with ESI-ToF traces. Additional charges apply.

Mass Check + Analytical HPLC
Explicitly ordered and performed Mass Check (MALDI-ToF or ESI-ToF subject to the "nature of the oligo" and metabion internal procedures) and Analytical HPLC (see FAQ: What´s the difference between preparative and analytical HPLC?). Product delivered with analytical HPLC and MS traces. Additional charges apply.

Yes, we also offer RNA oligos. Please click here for information.